[3]
Today I will show you how to replace
[6]
Fuel filter on 1.6 HDi
Peugeot and Citroen
[10]
First I will introduce the diesel filter
[13]
Here we have a filter manufactured
by Delphi
[19]
The filter is compact
[23]
Filter cartridge can not be removed
[33]
Conection for fuel heater and line in
[41]
Conection for water detector
[54]
Nut for water separator
[67]
Fuel filter is located besides the battery
[78]
It is necessary to remove
intake manifold
[85]
Required tools:
- tube key 10 mm;
- plers
[96]
Remove the battery
follow the instructions in the tutorial link
[123]
After remove the battery
[126]
You must remove and air duct
[129]
To access fuel filter
[142]
Remove vacuum tube from the conection
[146]
By pressing the two green buttons
[166]
Now remove the first fuel pipe line
By pressing the two white buttons
[182]
Remove second fuel pipe line
[187]
Move aside the harness from heater
[207]
Move aside tube for water drain
[221]
Unclip the fuel filter
[244]
Move aside the harness from water detector
[274]
Water in diesel detector
[295]
Remove the diesel heater
[340]
Refit on a new filterw
Water in diesel detector
[364]
Refit the diesel heater
[371]
following guide lines
[388]
Continue the fitting operations
in the reverse order to removal
[398]
Refit harness on water sensor
[413]
And harness from fuel heater
[433]
Put in guide lines the new fuel filter
[453]
Refit the fuel pipe lines by pressing
[482]
Now put back the battery
follows instructions from
dedicated tutorial
[534]
Before starting the engine
[543]
The new filter must be refilled with diesel
[550]
Otherwise the engine will not start
[554]
Unclip the style cover to gain access
to the repriming pump.
[561]
Squeeze and release the repriming
pump until fuel filter will be full
[590]
Now can start the engine
[605]
If the engine does not start at the
first attempt, do not try again.
[613]
Operate the repriming pump again,
then the starter.
[624]
If the engine runnig ok
[634]
Put the style cover back in position
and clip it in place.
[642]
I hope to be useful
For more tutorials, please subscribe.
