How Container Ports Work: Logistics of Intermodal Transport - YouTube

If you’re like me, you’ve seen wharfs and ports and been fascinated by the huge

ships, cranes, trucks and most of all by the containers stacked like building blocks.

But what are the processes of container ports like this?

How are containers unloaded, where do they go, and what happens next?

We’re going to find out if containerisation is as orderly as it seems, or if there is

some chaos in these neatly stacked rows – and what opportunity and challenges automation

has brought to the shipping industry.

Containerisation has changed the world.

Previously ships would hold multiple smaller loads all jumbled together into a cargo hold

– now the sorting of cargo into containers is done before the cargo is loaded.

This allows ships to have a greater efficiency when loading and unloading cargo.

But is has also brought new challenges for organisation, as gigantic ships dock in large

ports and need to unload hundreds or thousands of containers at a time.

Container terminals are hubs of intermodal transport.

That means that the containers are switching modes of transport, from a ship, which travels

on the sea, to either road or rail.

Containers can also be moved by air – but this is not usually the focus of container

ports.

Switching modes of transport is not quite as simple as loading a cargo container from

a ship onto a truck – multiple steps and organisational challenges are involved before

the container rolls out of the freight yard.

First – the container must be unloaded from the ship.

This is achieved with huge gantry cranes that are able to lift the several tonnes of container

and its cargo.

Cranes can be hinged to allow for passage of large ships beneath, or can be fixed, to

reduce airspace being taken up.

Freight terminal cranes are either semi-automated, or fully-operated by a human, and some ports

have a mix of both.

Cranes connect to containers by their corner fittings – which, like most other parts

of a container are standardised throughout the world, by the International Organisation

for Standardisation.

Another international standard is the unique identifier number which helps to keep track

of each container.

The containers are typically loaded onto Terminal Tractors.

These funny-looking trucks are meant for short-distance haulage, in order to get the container from

beside the ship, into the storage yard where the containers wait to be picked up by a truck

or a train.

In order to move containers around a storage yard, and onto trucks and trains, there are

several options for machinery – 2 of the most interesting are reach stackers and rubber-tyre

gantries.

Rubber-tyre gantries have wheels, and are cranes that are able to fully straddle containers.

Larger versions may run on tracks, rather than tyres, and can straddle multiple rows

of containers.

Reach-stackers have a long arm that can easily be used to stack containers several rows deep,

or to negotiate them onto semi-trailers and rail cars.

Every step of the process described so far has the capacity to be fully- or semi-automated.

And in fact, at some of the terminals at the Port of Rotterdam in the Netherlands – they

all are, at least partially.

At this port, a crane operator remotely operates the gantry crane via computer software that

unloads containers from a ship.

The container onto a fully automated terminal truck which drives it to the storage area

to be unloaded by an automated stacker crane.

This is one area where logical planning augmented by computers can provide a huge benefit.

Knowing exactly what date and time a container needs to be picked up, a computer can plan

the most efficient way to stack containers.

This ensures the container isn’t buried too deep in the stacks when its time comes

to leave the yard, reducing the number of operations required to access the required

container.

There are still some storage yards around the world that used a paper-based tracking

system.

For some of these yards, this means that containers are simply stacked according to when they

are brought in to the storage yard – so that when the time comes to take them out

again, they might be at the bottom of a stack of containers.

Like many other industries, computerised automation provides some unique benefits over human-operation,

such as accuracy of repetitive tasks and logical planning of efficient processes – until

something goes wrong and many hours are spent trying to troubleshoot and fix the issue.

For now at least, humans maintain the advantage of adaptability over fully-automated machines.

Automating a container port is very expensive, but ports implementing this technology hope

to gain benefits such as increased productivity, and increased safety.

Of course, even at ports where automation exists, humans are still employed to oversee

and maintain the machines and rectify problems as they arise.

As automation continues, concerns about job-losses are always on the forefront of debate.

There is also the real cost to society with a smaller income tax revenue stream to fund

things like roads and rail – the very things the transport industry relies on.

Ideas have been put forward for a robot tax to help subsidise this loss.

However these problems are dealt with in the future, it is clear for now that the inevitable

march of the machines will continue.

Perhaps the solution lies balanced somewhere in the middle.

With human operators and overseers able to quickly adapt to unforeseen problems, but

with machines performing dangerous tasks for us, and with organisational systems augmented

by computerised calculations.

Thanks for watching this video about how a shipping container port works.

Be sure to subscribe to the channel for more videos, leave me a thumb, and let me know

what you thought of the video in the comments.

Thanks for watching.